Application 01
Standard masonry
Load-bearing block walls, laying and jointing. The economical binder for walls that do not require high strength.
Dosage200–250 kg/m³
Chargement…
Chargement…
CEM II/B-L 32,5 · NM 10.1.004 / EN 197-1
The economical cement for standard masonry.
Priceprice on request
Free quote within 24h · Dakhla delivery included
Applications
Standard masonry, renders, simple slabs and unreinforced foundations: CPJ 35 is the most economical cement of the range. Its availability varies with production campaigns — contact us to check stock before planning your site.
Application 01
Load-bearing block walls, laying and jointing. The economical binder for walls that do not require high strength.
Dosage200–250 kg/m³
Application 02
Interior and exterior renders, fixing and repair mortars. Easy application and a consistent finish.
Dosage200–300 kg/m³
Application 03
Unreinforced slabs, outdoor walkways and slope screeds under surfacing.
Dosage250 kg/m³
Application 04
Strip footings and blinding concrete for light constructions.
Dosage200–250 kg/m³
Technical data sheet
Every batch is tested in our in-house laboratory before shipment. Conformity certificates available on request.
| Property | Value |
|---|---|
| Compressive strength (28 d) | 35 MPa |
| Strength class | 32,5 |
| Fineness (Blaine) | ≥ 320 m²/kg |
| Initial setting time | ≥ 45 min |
| Clinker content | ≥ 65 % |
| Standard designation | CEM II/B-L 32,5 |
| Standards | NM 10.1.004 / EN 197-1 |
| Packaging | Bulk (≥ 30 T), 50 kg bags, 1 T big bag |
Packaging
Minimum 30 T
Price on request
Tanker truck with pneumatic pumping straight into your site silo. The most economical mode from 30 tonnes.
Request this format
20-bag pallet (1 T)
Price on request
The classic masonry-site packaging. 20-bag pallet of 50 kg, tarpaulined for transport.
Request this format
Crane / forklift handling
Price on request
Handled by crane or forklift, no receiving silo needed. Ideal for medium sites and difficult access.
Request this format└ Volume-degressive prices (from 10T). Delivery included for any site within Dakhla — our only delivery zone.
Comparison
⟵ Scroll to compare ⟶
Quality
No truck leaves the plant without a compliant batch report. Every analysis is archived and the conformity certificate accompanies your delivery on request.
Buyer’s guide
CPJ 35 cement (Composite Portland Cement, strength class 32.5 MPa at 28 days, marketed as 35 MPa) is the economical reference cement for standard masonry and non-structural work in Morocco. Composed of at least 65% ground clinker with limestone, slag or pozzolanic additions, it offers an excellent price/performance ratio for all secondary site uses. Dakhla Aménagement produces consistently high-quality CPJ 35 at its Dakhla grinding plant, compliant with Moroccan standard NM 10.1.004 and European standard EN 197-1.
With a compressive strength of 35 MPa at 28 days, a fineness greater than 320 m²/kg (Blaine) and an initial setting time greater than 45 minutes, CPJ 35 is perfectly suited to load-bearing and non-load-bearing masonry, simple non-stressed slabs, finishing screeds and bedding mortars. Its price, set on request depending on availability, makes it the economical choice of masons, craftsmen and individuals for small and medium-sized residential construction projects.
The choice between CPJ 35, CPJ 45 and CPJ 55 depends on the intended use. CPJ 35 is the most economical (tariff on request, vs. tarif sur devis for CPJ 45 and tarif sur devis for CPJ 55), but its strength (35 MPa) limits its use to non-structural elements. For partition masonry, individual house slabs, screeds, renders and bedding mortars, CPJ 35 is largely sufficient. For any reinforced concrete element (beams, columns, load-bearing slabs, reinforced foundations), you must switch to at least CPJ 45. For major civil engineering works (bridges, ports, dams), CPJ 55 is required.
For masonry mortar (block laying), allow about 250 to 300 kg of CPJ 35 per m³ of mortar (350 kg/m³ dosage for load-bearing walls). For tile bedding mortar, 350 kg/m³ is sufficient. For a finishing screed, plan for 300 to 350 kg/m³. For a simple unreinforced slab, 250 to 300 kg/m³ is sufficient. For traditional renders, the dosage varies from 350 to 400 kg/m³ depending on exposure. Check our cement calculator to estimate the quantity needed for your project.
Dakhla Aménagement CPJ 35 cement price is given on request, as availability varies with production campaigns. It is available in 50 kg bags on 1T pallets, in bulk (tanker truck, minimum 30 tons) and in 1T big bag. These prices are volume-degressive, delivery included in Dakhla City (48h standard, 24h urgent). Request a free quote for personalized pricing. See also our dedicated CPJ 35 price page.
FAQ
CPJ 35 cement availability at Dakhla Aménagement depends on clinker arrivals and production schedule. Contact us at +212 658-265685 to check current stock and get a personalized quote. Our CPJ 45 and CPJ 55 cements are always available.
CPJ 35 develops 35 MPa at 28 days and is intended for standard masonry, simple slabs and unreinforced foundations — it is the most economical cement. CPJ 45 (45 MPa) covers standard reinforced concrete (beams, slabs, reinforced foundations). CPJ 55 (55 MPa) is reserved for highly stressed civil engineering structures. The higher the figure, the higher the strength and the price.
CPJ 35 is recommended for load-bearing and non-load-bearing masonry (block walls, partitions, tie beams), simple non-stressed slabs, unreinforced foundations (strip footings under walls), finishing screeds, bedding mortars and secondary roadwork. It must not be used for structural reinforced concrete — for that, prefer CPJ 45 or CPJ 55.
Yes, Dakhla Aménagement CPJ 35 cement complies with the Moroccan standard NM 10.1.004 and the European standard EN 197-1 (CEM II/B-L 32.5). Each batch is tested in our internal laboratory (compressive strength, fineness, setting time, stability) before shipment. Certificates of conformity are available on request.
No. CPJ 35 (class 32.5) must not be used for structural reinforced concrete elements (beams, columns, load-bearing slabs, reinforced foundations). For these uses, Moroccan standard NM 10.1.004 and the CCTG recommend at least CPJ 45 (class 42.5). CPJ 35 remains perfect for masonry, simple slabs and mortars.
Composite Portland Cement 45 MPa — reinforced concrete, slabs, foundations.. Price on request.
Read moreComposite Portland Cement 55 MPa — civil engineering, infrastructure, coastal areas.. Price on request.
Read moreTanker-truck delivery with direct pumping into silo. Ideal for large sites.
Read moreClassic packaging for masonry and small sites. 1T pallets.
Read moreEasy handling by crane or forklift. Perfect for medium sites.
Read moreComplete comparison guide to choose the right cement for your project.
Read more
Technical TipsJanuary 15, 2026
Strength class, NM 10.1.004 compliance, packaging: the three decisions that sum up choosing a cement, with a CPJ 35 / CPJ 45 / CPJ 55 table by structure type.
Read
Technical TipsJune 15, 2025
Practical formulas and worked examples to estimate your cement needs: foundations, slabs, walls, plastering. Correspondence tables.
ReadTechnical TipsJuly 1, 2025
Detailed comparison table of the two Dakhla Aménagement cements. When to use CPJ 45 and when to prefer CPJ 55 for your project.
ReadNext step
The configurator keeps this product pre-selected: quantity, delivery zone and discounts are calculated live. Our sales team responds within 24h.