Chargement…
Chargement…
Cement-based tile adhesive (CPJ 45/55) for bonding tiles, faience, stoneware and natural stone. Classes C1, C2, C2TE, C2TE S1/S2 compliant with EN 12004. Available in 25 kg bags, pallets and silo bulk. Delivery in Dakhla City and across the Dakhla region.
Tile adhesive formulated from DAM cement (CPJ 45/55)
Classes C1, C2, C2TE, C2TE S1/S2 — lab tests
Extended open time formulas for southern Morocco sites
25 kg bags, full pallets, silo bulk on request
Cement tile adhesive covers all tiling needs, from interior wall to exterior terrace.
Kitchen faience, bathroom, interior wall tile.
Stoneware, cement tiles, indoor and outdoor floor.
Slabs ≥ 600×600 mm, marble plates, heated floor.
Swimming pools, Italian showers, balconies, terraces.
The choice of class depends on the tile type, substrate, area (interior/exterior) and format. Comply with EN 12004 and DTU 52-2.
| Class | Use | Adhesion |
|---|---|---|
| C1 | Interior, stable substrates, tile ≤ 600×600 mm | ≥ 0.5 MPa |
| C1 TE | Interior, extended open time (heat, fast drying) | ≥ 0.5 MPa |
| C2 | Exterior, large format, stoneware, pools, balconies | ≥ 1.0 MPa |
| C2 TE | Exterior large format, extended open time | ≥ 1.0 MPa |
| C2 TE S1 | Substrates subject to movement (heated, wood floor) | ≥ 1.0 MPa, deformable |
| C2 TE S2 | Very deformable substrates, slab on pedestal, terraces | ≥ 1.0 MPa, very deformable |
Cement-based tile adhesive is a ready-to-mix dry product, composed of Portland cement (CPJ 45 or CPA), calibrated fine sand, mineral fillers and admixtures (redispersible resins, cellulose ethers, fibers). It advantageously replaces traditional mortar for tile bonding: better adhesion, faster application, thin bed, planimetry recovery, and superior mechanical performance. In Morocco, its use is now the standard for all serious tiling sites, indoors and outdoors. The C1/C2 classification of EN 12004 standard (and DTU 52-2) allows choosing the right product according to the application.
A quality cement tile adhesive contains about 30-40% cement (CPJ 45 or CPA), 50-60% fine sand 0/0.5 mm and fillers, and 3-8% admixtures. Redispersible resins (VAC/EVA/SA) ensure adhesion and deformability. Cellulose ethers control water retention and open time. Fibers (PP, PVA) improve cohesion and crack resistance. The cement used comes from our Dakhla grinding plant (CPJ 45 or CPJ 55 depending on the target class), ensuring full traceability and optimal freshness.
The EN 12004 standard defines two main classes: C1 (adhesion ≥ 0.5 MPa) for standard interior applications and C2 (adhesion ≥ 1.0 MPa) for demanding applications (exterior, large format, stoneware, swimming pool). TE (Extended open time) variants extend the open time, useful in the hot Moroccan climate where the surface dries quickly. S1 and S2 variants indicate deformability capacity (for substrates subject to movement: heated floor, wood floor, slabs on pedestals). The choice is based on the tile, substrate, application area and format. For Southern Morocco (hot climate), systematically prefer a TE class to maintain sufficient open time.
The price of cement tile adhesive in Morocco varies according to class and brand. Expect 70-90 DH/25 kg bag for standard C1, 95-130 DH for C2, and 140-180 DH for high-performance C2TE S1 or S2. In full pallets (40-48 bags), discounts of 10-15% are possible. For a complete tiling project (floor + walls), plan about 4-6 kg of tile adhesive per m² depending on the tile format and trowel used. As tile adhesive is formulated from CPJ 45/55 cement, its price is correlated to that of cement — see our cement price page for context. These are market indications — DAM does not sell tile adhesive.
A cement-based tile adhesive mortar is a dry mix of cement (CPJ 45 or CPA), fine sand, fillers and admixtures (redispersible resins, cellulose ethers, fibers) to which only water is added at the time of use. It is used to bond ceramic tiles, faience, stoneware, natural stone, marble and glass to any stable substrate (concrete, render, screed, old tile, partition). It differs from traditional cement mortar by its plasticity, adhesion and shear strength, guaranteed by the admixtures.
The C1/C2 classification is defined by the European standard EN 12004. A C1 tile adhesive (adhesion ≥ 0.5 MPa) is suitable for standard interior tiling on stable substrates: kitchen faience, bathroom, wall tile. A C2 tile adhesive (adhesion ≥ 1.0 MPa) is recommended for exterior tiling, large format (> 600×600 mm), stoneware, swimming pools, balconies and high-traffic areas. C2 comes in variants: C2TE (extended open time) and C2TE S1/S2 (deformable, for substrates subject to movement).
The water dosage is specific to each product and indicated on the packaging (usually 5 to 7 liters of water for 20 kg of powder, about 25-30% water by weight). Never overdose water: this reduces adhesion, lengthens drying and favors crazing. The tile adhesive should have a "pasty" consistency that holds to the trowel without running. Mix by pouring the powder into the water (not the other way around), mix at low speed, let it rest 5-10 min (maturation) then remix before application. The amount of powder used covers 3-6 m² per 25 kg bag depending on the trowel used.
The price of a cement tile adhesive in Morocco varies according to the class (C1, C2, C2TE S1) and the brand. Expect an average of 70-90 DH per 25 kg bag for standard C1, 95-130 DH for C2, and 140-180 DH for high-performance C2TE S1 or S2. In bulk or full pallet (40-48 bags), discounts of 10-15% are possible. For a complete tiling project (floor + walls), plan 4-6 kg of tile adhesive per m² depending on the tile format. These prices are market indications — Dakhla Aménagement does not sell tile adhesive; we produce the CPJ 45/55 cement that goes into its formulation (on request delivered in Dakhla).
Cement tile adhesive is suitable for most ceramic tiles, faience, stoneware and porous natural stones. For very dense stoneware (low absorption), glass, marble or low-absorption stone, a specific tile adhesive (C2 + resin) is recommended, or even a two-component adhesive (resin + hardener). For swimming pools and constantly immersed areas, use a class C2 tile adhesive, preferably a C2TE S1 or S2 variant, and entrust waterproofing to a dedicated system beneath the tiling. In case of doubt, consult DTU 52-2 and our technical team.
Composite Portland 45 MPa cement — base for C1/C2 tile adhesive.. Price on request.
اقرأ المزيدComposite Portland 55 MPa cement — base for C2 high-performance tile adhesive.. Price on request.
اقرأ المزيدCPJ 45, CPJ 55 cement prices and related tile adhesives.
اقرأ المزيدFree quote within 24h for tile adhesive and DAM cements.
اقرأ المزيد
نصائح تقنية15 يونيو 2025
صيغ عملية وأمثلة رقمية لتقدير حاجياتك من الاسمنت: الأساسات، الأرضيات، الجدران، الطلاءات. جداول مطابقة.
اقرأ
نصائح تقنية1 يونيو 2025
نصائح مهنية للتسليح والصب ومعالجة الخرسانة المسلحة في الظروف المناخية المغربية.
اقرأ
نصائح تقنية15 Décembre 2024
جرعة خاطئة، ماء زائد، تخزين مهمل، معالجة منسية، فك قوالب متسرع: الأخطاء الخمسة الأغلى ثمناً، بأرقامها، والانعكاسات التي تجنبها.
اقرأOur production: CPJ 45 cement on request and CPJ 55 on request, delivered to Dakhla sites (delivery included, 48h/24h). Free quote within 24h.